- another Laconico design
It would be an exaggeration to say that I collect knives designed by Ray Laconico, but it so happens that I have a couple of them at the moment, of which this one from Artisan Cutlery, called Revel, is the latest!
I have also reviewed another model from Artisan's sister brand, CJRB, called Prado, which is also designed by the same person.
 |
| Artisan Cutlery Revel |
Like many models from Artisan Cutlery, this one is also available in several different versions. In this configuration, the Revel comes with a metal handle and a slightly simpler steel, but it can also be had with an FRN handle with the same steel or a really nice S90V. The FRN versions are button locks and are also available in different colours and with or without black-coated blades.
Depending on budget and needs, there are different options to choose from.
Then, Revel has also been made in a couple of extremely luxurious editions featuring titanium handles and S90V or Magnacut. But they have been sold out for some time now.
 |
| Revel is another stylish knife signed by Ray Laconico |
Short version: Artisan Cutlery Revel, A stylish and elegant knife that is both easy to carry and practical as an EDC knife
Blade
The blade is a quintessential Clip point, which in this case has proportions that make it reminiscent of a typical Bowie knife. Although in a smaller and folding version. Smaller in this case is still relatively substantial for a folding knife with a length of 90 mm. This should be put in relation to a height of 32 mm at most. The blade material is 3.2 mm thick.
 |
| The most distinctive feature of this knife is the distinctive clip-point blade. |
The finish is a glossy satin, and the marking consists of the Artisan Cutlery logo on one side of the ricasso and on the opposite side, you will find the serial number and steel type. The Laconico name is also found on the blade. However, everything is sympathetically discreet and does not destroy the clean lines of the blade.
They are also reinforced by a pronounced false edge and a high sabre grind. The latter measures just over two centimetres in height. This causes the blade to narrow to about 0.6 mm behind the edge. A figure that, in my opinion, is too much for a folding knife and more suited to a large cleaver. Here, Artisan Cutlery could well rely more on the material and thin out the blades.
The blade is also distinguished by the fact that the beginning of the spine tends upwards and forms a thumb ramp with grooves for better grip. Then the blade hole is, of course, something that is obvious.
The steel used is AC's own AR-RPM9 steel, a steel that has proven to be viable. It is a typical all-round steel in the mid-segment, where you also find competitors such as 14C28N and N690. Not at all fussy, actually. It holds its sharpness fairly well and resists corrosion well. It is also very easy to sharpen, which is always nice.
 |
| The steel used is Artisan Cutlery's own AR-RPM9 |
As soon as you start using the Revel, you realise that this is a practical knife. A clip point blade is often good for many things, and that applies here as well. For more common EDC tasks such as cutting plastic straps, tape, rope and thinner string, cutting nylon straps around packages, etc., this blade works very well. In addition, there is something about the geometry that, despite the knife being thick behind the edge, makes it a veritable cardboard shredder.
The tip is also just as good as it looks. Sharp without being too flimsy. Then we come to the most positive surprise. Revel cuts very well in wood! That it does so in fresh branches may not be so strange. The factory edge gets approved; it is sharp and symmetrical. But that the knife would be so good for drier wood was surprising to me. The handle also helps by being long enough so that the little finger does not get an unpleasant amount of pressure when the knife wants to rotate in the hand when there is some force behind the cuts.
Even in lighter materials such as ordinary textiles, Revel is very workable. A lot of clothes are used for cleaning bicycles in a cyclist's household, and I make them out of worn-out clothes.
Handle
The handle on this version is, as previously stated, made of titanium. In this case, this means two solid pieces that are just over three millimetres thick. No attempts have been made to lighten them. They are flat on the inside, which, on the other hand, makes cleaning easier. A detail that is also made easier by the completely open back. There is also a bolt with a hole in it for a lanyard. In order for it to be used, a thinner string must be used. There is no space for, for example, a standard 550 paracord.
The knife is held together by two spacers in addition to the pivot screw. The screw heads are actually T8s but really bad if I'm being honest. The grip for a tool is almost non-existent with a domed screw head and a very shallow groove. Do not disassemble this knife! The risk of you standing there with round screw heads is almost one hundred per cent!
 |
| In this version, Revel has a titanium handle |
The length of the entire handle is 115 mm, of which the available space for the fingers is about 93 mm. However, this does not feel cramped at all as the finger guard is softly shaped and you can place half your index finger over it without any problems. At the back, the handle widens slightly to prevent you from slipping backwards when cutting with the knife.
 |
| The knife is open at the back, and there is also a mount for a very thin lanyard. |
The titanium sides are designed so that the pattern that is there gives the impression of panels. It gives a little grip, but it is mainly the shape and the depression for the index finger that help to keep the knife in the hand. There are also some grooves on the base of the blade spine for a thumb, but they are more of an indexing nature than giving any real grip. Something that I am happy about, as there has been more and more discussion recently about how such depressions in knife blades affect the general durability.
The finish overall gets approved as the edges and corners are sanded and rounded as they should be.
 |
| The Revel has a very comfortable handle. It's a little too thin to be extremely ergonomic. |
In the hand, the Revel is comfortable in a relatively neutral way. It is not an ergonomic muscle package, but the index finger finds its place, and so does the rest of the hand. Then the relatively simple shape means that the two basic grips, sabre and hammer grip, work excellently.
The same can be said about reverse grips; nothing annoying there either. In general, the clip also stays out of the way despite being of the "deep ride" type. This is appreciated as they sometimes cause chafing due to their location far back on the handle.
Opening and Lock
This is an easy-to-open knife, provided you appreciate Spyderco's invention of the blade hole, of course. The alternative is to open the knife with two hands, which is, of course, possible.
 |
| The opening method is clearly visible from the hole in the blade |
The blade hole is easy to access and comfortable to use as it is bevelled sympathetically. Much more and it would have become slippery. It is always a trade-off.
The fine ceramic ball bearings mean that this knife's blade has a tendency to fly out quickly. This is especially true if you use a so-called "Spydie flick" with your index finger on the back of the knife.
Then the blade is quite heavy, depending on the shape and thickness, so the detent can be overcome with a flick of the wrist for those who want to provoke their knife and open it that way.
A small disadvantage with the crispy opening and the heavy blade in combination is that the pivot screw has a tendency to unthread itself. You either have to adjust it at regular intervals or provide it with a little thread locking to keep it in place. After a while, otherwise the opening becomes too easy, and the blade starts to point away from the locking side. With a properly adjusted pivot, the blade is otherwise centred.
 |
| Here you will find a classic frame lock with associated lock bar reinforcement and overtravel stop |
The lock found on this knife is a frame lock with the usual accessories. This means a steel-reinforced lock bar and an overtravel stop.
The function is very good with a lock that always engages and a lock bar that is easy to reach. The lock bar is also quite soft, which makes the lock easy to release. However, not so easy that it slips under incorrect load, i.e. pressure or light blows to the blade spine.
I also do not experience any play in the blade with the lock in place. However, this applies as long as the pivot screw has not unthreaded itself, of course.
To Carry
Revel is not too bad to carry in a pocket. With its 114 grams, as measured by me, it is not intimidating for its size. It is also just over eleven centimetres long, as mentioned above. This should be paired with a height of at most 35 mm and a thickness of only just over a centimetre.
Overall, a thin and light knife, especially if you compare it to the length of the available edge.
 |
| The clip is simple and of the spring steel type |
The sides of the handle are flat, which also doesn't pose any obstacle when the knife is stored in a pocket. The pattern on the titanium does not affect how the knife feels when pulled or put away.
 |
| This is what Revel looks like in a pocket |
The clip on the Revel is of the simplest kind, and here it is noticeable that this is actually a "hotter" version of a simpler model. That is, the titanium itself is an upgraded luxury detail.
Here you will find a spring steel clip directly picked from the manufacturer's shelf, and it is also found on other models. However, this does not mean that it is bad, just that it is nothing special and may look a little boring. A plus, however, is that its shiny polished finish is repeated in both screws and blades.
The function is good with some remarks. The ramp is small but generally does not pose a problem, although, as usual, I have comments on the tips pointing outwards. They can both chafe and feel sharp if you hit your hand on them. The springiness in the clip is good, and the space underneath, well, adequate, no more. Especially not as a couple of millimetres at the back edge is stolen by the fact that the clip is not recessed into the handle side. Another slightly cost-saving measure. Machining time is money.
To Conclude
Revel is another stylish and practical knife from Ray Laconico's pen or perhaps a CAD program. All the lines are as they should be, and what made me choose this knife was the stylish blade. It is shiny, nice and is a clip point that gives Bowie knife vibes. Just right in my opinion.
Then I like the purity of Laconico's design language in general. A few custom knives from him would not be unwelcome, but that is beyond my financial muscles. Instead, I have to rely on Artisan Cutlery, among others. In general, I have come to like their way of making knives in terms of production quality. Both fit and finish are usually good.
This is also the case, although with a few small exceptions.
 |
| Revel is a sympathetic EDC knife as it is both practical and easy to carry. |
It's about a few small details, but they annoy me a little, I have to admit. One such thing is the quality of the screws. They are simply not good in this case. The screw heads are far too shallow. Enough said about that. Although the next detail is also about screws, it is the pivot screw itself. The problem with it unthreading itself is certainly quite easy to fix, but it assumes that you have Loc Tite or similar at home.
Then there was the grind. A sabre grind is what it is, but in this embodiment, I think it is far too thick behind the edge. What tasks should be performed with a folding knife that requires it to be 0.6 mm thick behind the edge? Now, it can also be fixed by grinding or rather, completely reprofiling the edge. It is too much work for me.
That said, the Revel doesn't cut badly, just not as well as I would like. But there is no risk of the edge chipping. It holds up well, and in combination with a comfortable handle.
Something that can also be discussed is whether or not there should be titanium on this specific model. On that point, Artisan Cutlery cater to different tastes, and I happened to choose this version. As I said, the model is available in other materials and more exclusive steels for those who prefer it.
 |
| Artisan Cutlery Revel is also sturdy enough to work in the woods if you feel like it |
Overall, it can be concluded that the impressions of Revel are that this knife is a result of another successful collaboration between Artisan Cutlery and Ray Laconico. They have done it before, and I believe it will happen again.
Revel is both a stylish and not least easy-to-carry knife and is an excellent platform for those looking for a good EDC knife. Then, not least, the low weight combined with the fact that it cuts well in wood means that it is not unsuitable for outdoor activities either. There are options, and the simplest ones have a target price of $ 45, and this version ends up around $ 90.
Specifikations:
Length Overall 205 mm
Length Folded 115 mm
Weight: 114 g, weighed by me, stated 113 g
Blade Length: 90 mm
Blade Thickness: 3,2 mm
Blade Steel: AR-RPM9
Handle: Titanium
Lock: Frame Lock
Produced by Artisan Cutlery, made in China
/ J - positive
Inga kommentarer:
Skicka en kommentar