Review ANV M25

  

- when practical becomes sexy

I saw right away that this was a knife for me. The ANV M25 spoke to me as they say. Sometimes you can tell from pictures when many hours have been spent on design and the result is successful.

It becomes particularly clear in this case, as it is obvious that all unnecessary features have been stripped away to create an extraordinary, competent military knife. It also turned out to be a superb outdoor knife.* Not least because, unlike some other knives in the class, it is just the right size.

Light and flexible knives are especially nice when you have other things to carry, which is often the case outdoors. Or if you are carrying a gun and combat harness with everything that goes with it.

ANV Knives M25

The reason why it is also a good outdoor knife can be found in the fact that the M25 was certainly developed in collaboration with parts of the Czech army, but it does not belong to the category of knives that can be considered pure weapons. Examples of such are daggers of the Fairbarn-Sykes type and the like. They only serve one purpose.

The M25 is instead an all-round knife with a focus on simple, practical tasks, but which doesn't get lost in any situation, whether it's survival scenarios or more everyday situations. It is developed together with the "Strakonice 25th Anti-Aircraft Missile Regiment". It is something that is reflected in some details of the knife that I will return to.

The result, however, is a rather nimble knife that measures 240 mm in length and weighs in at a light 140 g for the knife alone and 219 g for the whole package.

ANV has developed a military knife that is just as good for outdoor life

Short Version: ANV M25, a knife that oozes competence. It is deceptively simple and well-built, strong yet light and well-balanced.

Blade

As is often the case with competent blades, the shape of the M25 is simple. A slightly modified drop point is used here. The blade has a relatively high saber grind. This gives a blade that cuts well without being too thin and therefore fragile. The blade thickness is 4 mm, which contributes to the strength without being excessively thick. It helps keep the weight down and makes the knife cut better when cutting through stuff.

The length of the blade is 11 cm and the height is approx. 2.6 cm. The marking consists of Acta non verba Knives' stylized logo on the presentation side and model designation, country of manufacture, and steel type on the other. It sounds a lot but is very discreetly applied.

This knife has an eleven-centimeter long slightly modified drop point blade

The steel is, as is often the case with knives from ANV, Swedish. This time it's Sleipner, which is a high-alloy tool steel from Uddeholm. Think of it as an even tougher D2. To prevent corrosion and get less reflections from the blade, it has been given a DLC coating. Quite simply, it is one of the best finishes available in the knife world. It fulfills its function while being very strong and does not wear out in the first place.

Then there were the odd details. One of them is found partially on the blade but extends over the entire back of the knife. It is a series of indentations that exactly correspond to the distance on a 1:25000 scale map. The notches correspond to distances from 250m to 1 kilometer and then up to 5 km. One thing that might be of interest if everything else goes to hell and you have to calculate distances manually if you happen to be in an anti-aircraft regiment. 

Another very practical detail is the recess found near the handle. It is to facilitate the use of fire steel. The edges there are ninety degrees and sharp, unlike the blade spine which is softly rounded. 

At the blade base, some well-placed notches are found for better traction. They are just deep enough and with enough bite to work really well.

The steel used is Uddeholm's Sleipner with a DLC coating

Speaking of bite, it's one heck of a bite in the blade. Time has not only been spent on details. The most important features are also in place. In plain language, this means that the M25 is also damn good at cutting things. This applies to everything from wood and dry timber to cardboard, plastic, and the like. I haven't pried open cans so I can't comment on that. On the other hand, the edge bites well into ropes of different thicknesses and materials. 

Here, ANV has succeeded in striking an excellent balance between keeping the blade strong while at the same time daring to let the knife be thin enough behind the edge to, together with the high flat grind, make a knife that cuts really well. That's something I appreciate more than the fact that it's totally bombproof, as in you can stand on it when the knife is driven into a log, and similar tests I've seen on YouTube. 

I cut and pierce with my knives. When we talk about poking things, it can be pointed out that the tip is effective as well. It is also where you would expect. Not too high, not too low. 

Handle

The M25 is a full tang knife whose handle consists of two pieces of solid Micarta held in place with a pair of sturdy T15 screws. The handle is slightly over twelve centimeters long, depending on whether you include the protruding metal or not. The available surface behind the finger guard is just under eleven centimeters. It is excellent because it allows the handle to accommodate slightly larger hands even if you happen to be wearing gloves. At the same time, it is narrow enough even for smaller hand sizes.

The handle consists of two solid pieces of well-shaped Micarta screwed in place. It is finished with a special chisel which, however, can be used for other purposes as well

The Micarta is of the highest quality and is heavily contoured. The handle sides are strongly three-dimensionally shaped and pleasantly blend into the hand. At the same time, they have a fairly advanced pattern that grips very well. I have found that it is impossible to slip, not even with cold and wet hands. What makes the pattern advanced is that it has deeper grooves along the spine- and underside, which gives higher friction than on the sides where it is somewhat finer. It is particularly effective when combined with the notches found in the metal on the underside of the handle.

The handle is strongly shaped but very proportional. Here you can also see the notches that act as distance assessment tools for maps on a scale of 1:25000

Speaking of odd details that were mentioned earlier, it can be stated that in addition to the distance scale, a screwdriver is also found at the end of the handle. It's not just any flat chisel, but it happens to fit the nose cone of an RBS missile. However, I can reveal that it works great for other things as well. It's lucky since I'm running out of missiles in my back pocket. In addition, there is a lanyard attachment here if you want to use one. 

This is a well-balanced knife that feels very light and lively in the hand

The balance of the knife is excellent and the balance point is found right at the finger guard, which makes an already light and flexible knife even more nimble in the hand.

Incidentally, this is one of the better handles I've come across. It simply fits a human hand superbly. It may sound like a matter of course, but sometimes it is missed in the eagerness to shape the handle for different tasks.

All grips work and I mean all

The M25 has a grip that is sculpted but it's really comfortable in any grip I can think of. This applies whether you hold the knife in more conventional grips such as hammer and saber grips or if you turn the knife over and hold the knife like an ice pick with the edge forward or backward. Everything works.

The same applies if you cut with the knife for a while. However, if you use the M25 for heavier tasks and cut a lot of wood, it can be nice to have a pair of thin gloves. As I said, it is a handle with a good grip and it can also be felt against bare skin after a while.

The Micarta provides a good grip and acts as an insulator in cold weather

But it also means that it works well in snow and cold with a bit of a hand and wet fingers. The Micarta insulates somewhat. Not as well as a wood handle and it is a full tang knife so the bare metal can be a bit cold.  

Sheath

The included sheath is made of Kydex. An excellent choice as it is both durable and can withstand all elements, be it heat or cold. It is also malleable which is another reason why it is used in the knife industry. This is a pancake model and is held together with no less than twelve eyelets. In addition, there are two slots for additional straps, so there is no shortage of ways to attach your knife to a belt, backpack, or battle harness.

The pancake-style Kydex holster is fitted with ANV's own belt loop solution

As you know, sheaths have a couple of different tasks to fill. Of course, they must hold the knife in place so that it does not disappear. It must also protect the knife and not least the edge. Another task is to protect the wearer from the knife. It is not recommended to have such a thin sheath so that, for example, you risk injuring yourself if you fall on your knife and it goes through the side of the sheath. Something that can happen if you are out at night, which happens to be a situation that can apply to military personnel from time to time.

It's also good if the sheath keeps quiet so it does not rattle when the knife is in place. In addition to being annoying in general, it is also not good whether you are looking for either people or animals. Or just being a bird watcher for that matter.

A good sheath must also be durable and make the knife easy to carry. How does this sheath meet the criteria?

The mount can handle belts/straps up to seven centimeters wide, which covers most of them

With mixed success is the answer. Most of it is good but not all. The knife is held in place tightly enough that there is no risk of it falling out of the sheath. Not even if the knife is upside down. However, there is no extra security strap so you have to rely on the snap in the material for retention. On the other hand, it makes the knife easy to draw. The easiest is to place your thumb against the edge of the sheath and press lightly and the knife is loose.

Something less good is that it doesn't actually keep quiet. The knife moves enough to rattle. It is the fit around the blade that is too wide. It certainly saves the coating on the blade from wear through less friction when the knife is pulled and put away, but it is still not the best.

The fastening straps are of ANV's own manufacture and they are made of some form of very tough plastic. At first, I thought they would be at risk of coming off but after using another knife, the M311 with the same type of belt loops for a longer period I can say they last. 

They are extremely wide and take belts/straps of up to seven centimeters. But unlike, for example, Tecloc solutions, the bracket cannot be adjusted for belt width, which means that the knife can move a little if you wear a thinner, normal military-type belt. 

Also, I'm not entirely fond of how high the knife ends up when it's worn straight up and down in a belt. The handle then ends up very far up and stabs me in the side. Therefore, I mostly carry the knife attached to a backpack when I have one or loose in a bag in more everyday contexts.

I also tested turning the belt loops and carrying the knife in the so-called "Scout Carry" with the knife horizontally in the lower back. Something that usually works well if you don't carry a backpack. Especially with knives that are this small and above all light. In this case, it works, but the sheath is not completely adapted for the purpose, so you have to fasten the straps with one screw per piece instead of two.

Conclusion

It's nice to know that I haven't lost touch with my inner knife reviewer! What I mean is that I can often determine how a knife will feel or rather suit me by photos alone. But that feeling is not one hundred percent certain and therefore it is even nicer when the first impressions confirm that feeling.

It gets even better when those impressions last over time, which brings us to the ANV Knives M25. It is still one of my favorite knives of all time, even after testing and wearing it for quite some time now. It's getting close to a year!

The M25 is small and flexible enough to be carried in a bag even for everyday use

I have described in some detail why. But the overall picture shows that the knife is extremely balanced. This not only refers to where the weight is located but also the properties. A strong knife that really cuts and penetrates well while being just the right size and still lighter in weight than most.

The latter is a topic often missed in the context. But it is of great importance regardless of the reason you are outdoors, on a mountain, or in a forest due to camping and hiking or on a secret mission. The amount of equipment you have with you is of crucial importance. In civilian contexts, it's about making the experience as pleasant as you can, and in military contexts, you should be as mobile as possible.** A couple of hundred grams saved on a knife can also mean a couple of hundred grams more ammunition. For those reasons, I appreciate the format extra. 

Then there are many examples of why this is a well-thought-out knife. Mainly it is how well the knife actually cuts but also how it works for different hand sizes. It is another proof of proper design and is very important when it comes to supplying entire military units with knives. Not all soldiers have identical hands.

Then there are the discreet built-in features that are there for those who need them but are out of the way for everyone else.

ANV M25 is a damn good outdoor knife which makes it a good military knife as well 

In short, I think the M25 is one of the better military/outdoor knives available. Some are just as light but often come equipped with inferior materials. Some have the same standard of steel and handle, but they are often heavier.

ANV has simply found a balance close to perfection. My advice is to buy it!

ANV

Specifications:

Length Overall: 240 mm
Blade Length: 110 mm
Blade Thickness: 4 mm
Steel: Sleipner med DLC-coating, 60HRC
Weight: 140 g/knife only, 219 g with sheath (weighed by me, stated weight, knife 145 g)
Handle: Micarta
Sheath: Kydex

Produced by ANV, made in the Czech Republic


/ J - found a gem

* There are more examples of similar knives, of course. The class includes knives such as Fällkniven F1 and its predecessor Cold Steel SRK, Peltonen Sissipuukko M95, Glock M81, and others.

** I did my military service as a dog handler in the Navy and I can tell you that you don't want to carry too much when you are on the other end of a trail line following a dog through bushes and undergrowth.

New Knife - Al Mar SERE Operator 40

Today I will present something as interesting as a new...old knife. What do I mean by that? Well, this model has been produced before and also in several different editions. Among others, it was manufactured by TOPS* a few years ago and then of course by Al Mar themselves back in the day. The original did not have the three tubes to attach the handle sides but screws instead and was slightly larger. Otherwise, this version and the original are very similar.

This is, as the title says, the SERE Operator 40, which is now back in the range, something that makes me glad.

Al Mar SERE Operator 40

It is enough to look at the dimensions and you will understand that this is both an all-round and very well-thought-out utility knife. Certainly, it looks a tad aggressive with its spearpoint blade or as Al Mar chooses to call it "talon", which to most others refers to a completely different blade shape. But if you study the design of the edge, the height of the primary bevel, and the length and thickness of the blade, you begin to approach a sturdier Mora knife in format, say Bushcraft Black for example, even if this knife is older.

The SERE Operator measures no more than 8" or 203 mm in total length and the blade is 4" or just over a decimeter long. It weighs as little as 275 g with the sheath and the knife at 177 g. It's good for a full-tang knife. This model can also be had in a smaller version with a 3" long blade.

A modern classic is back in production!

The blade features D2 steel with a stated hardness of 59-60HRC and the handle is made of polished G10. The sides are attached with three steel tubes. The finish is good.

The sheath is made of composite plastic and comes with a variant of a Tec-Lok mount that fits most things from belts and backpacks to MOLLE systems.

Overall it's a very interesting package and in my eyes, it's a damn good-looking knife. A modern classic. I look forward to testing and reviewing this in the spring which hopefully will be here soon.

Al Mar

/ J 

*A variant that, however, deviates from the original on several points.

Review EKA RTG-1

  

- a serious step towards a broadened range

With this new venture, the long-standing Eskilstuna Knivaktiebolag is leaving or perhaps rather supplementing its more traditional range. There you will find, for example, classic folding knife models in the Swede series and fixed blades of all kinds for hunting and other outdoor activities. Not least, the G3 "Swing blade" is a well-known model among hunters.

The modernization has previously mostly consisted of some models getting handle materials other than wood, read "orange or black rubber", even though they have been producing knives with plastic handles for a long time as well.* However, the models have mainly been of the classic type with slip joints and lock backs. But then something happened and the catalog was expanded with a couple of more modern folding knives and not least this knife called RTG-1. 

It can be said to be EKA's flagship when it comes to both capacity and quality among the fixed blades, which made me curious. It simply looks very competent!

EKA RTG-1

As for the new venture, it must be admitted that I, certainly without having handled them, is not entirely convinced of the merits of some of the folding knives. Especially not after taking a closer look at what the Classic 8 Titanium has to offer. There, for example, the sales text enumerates all the merits of titanium and what it is used for, but then it turns out that the knife is not made of titanium but of steel with a titanium coating and all that entails. An extremely dubious text and probably a knife in my eyes. Nor does the design of the T9 impress, which already shows visible flaws in the design to name a couple of examples.

Therefore, expectations were not very high when I was waiting for the RTG-1 must be confessed. Imagine my surprise as this knife is as solid as a knife can be and to a very high standard.

But EKA has also turned to experts in the field. Unfortunately, this knife is not made in Sweden and no Swedish materials are involved either. But the next best thing is to use the production capacity of those who know their stuff. In this case, they have turned to the Idaho-based American company Rowen Manufacturing. That's why those who think they recognize the style of the knife when it comes to the sheath, blade finish, and handle screws are right. They are the ones who make ESEE's knives too! Something that can be traced in appearance.

The knife can be obtained in a number of different designs where the color of the blade and the handle material are varied. Either the knife comes with G10 in the handle like this black version or linen Micarta is used.

RTG-1 är en robust kniv som klarar det mesta

Twitter version: EKA RTG-1, an abbreviation to be read "Ready to Go". The name describes this Swedish-American in a good way. It's actually ready to spring into action and can handle almost anything you ask of it.

Blade

Blade shapes can be made more or less complicated. In this case, the person or persons behind the design have invested in simplicity. This means a drop-point blade with harmonious proportions. Concretely, this means a length of 15 cm and a height of 3.3 cm. The thickness of the blade is 5 mm, which I think is well-balanced to balance durability against the ability to cut well.

Now the thickness is not the only factor for performance, but other geometry, including thickness behind the edge, plays a big role. RTG-1 measures a full 1-1.2 mm there by the way. A strong and durable edge, but it needs to be properly sharp in order for it to cut. Given that and that the transition to the thicker part of the blade is quite abrupt, this is not a "slicer" as they say in English. The knife is more suitable for chopping and cutting. 

1095 carbon steel is found in the 15 cm long drop point blade

The blade is fully flat ground with a distinct secondary bevel. And while I'm on the subject, it can be said that the factory edge was really good! It is both straight and symmetrical and also sharp as hell. The knife shaved hair without any resistance and despite the relatively thick blade with its coating, it slid through paper with a faint hiss.

The coating given to the blade is the same as found on many of ESEE's knives.** About that there is a lot to say and I really would have preferred a smoother finish than what powder coating gives. The one that exists actually provides some resistance in some materials. In return, it is very durable and there has been no wear and tear during this time. But given the choice, I prefer some form of DLC.

The steel used is a familiar carbon steel in the form of 1095. EKA themselves claim that it is chosen because it is superior to stainless steel in terms of strength. With modern steel, it is probably something that can be discussed from a practical perspective, but basically, they are right and I see no problem with the choice of material. Properly treated, it is a steel that can be made extremely sharp and which also exhibits high impact resistance. Something that can be good in this type of knife where some abuse can be relevant. It is also steel that is easy to both maintain and resharpen. The downside is that it has a tendency to rust. That's why they chose to coat the blade, which solved that problem for the most part.

The blade is powder coated to prevent corrosion

As I said, the factory edge was sharp, but it is noticeable when you use the knife that the steel is quite soft. Sharpness must be maintained fairly frequently. EKA does not specify a hardness number, but only writes on the website that the steel is "specially treated". If we ignore the poor language it doesn't say much, but I guess it is the coating rather than the sharpness that is referred to. But in ESEE's own models, the steel is usually kept as soft as 55-57 HRC. We are thus talking about "Victorinox soft". Unlike small folding knives, the RTG-1 does not cut very well when the edge is dull. 

The material I have worked with the most is, of course, wood in various varieties, both dry and fresh. As I said, this is an outdoor knife and is, therefore, of course, used for fire making. I'm not a "bushcraft person", so rubbing sticks against each other using "bow drills" and the like is not relevant. But some chopping of thicker branches, batoning wood and sometimes cracking smaller pieces are. For all this, the RTG-1 is an exemplary knife. It doesn't have the weight and size to be used as a chopper, but there I use a small ax instead. On the other hand, it is sturdy enough that one should dare to hit it when batoning or if it is to be forced through hardwood crosswise against the grain.

RTG-1 cuts through most anything including car tires

The knife is almost as sympathetic when it comes to carving. The balance combined with good control and a good edge angle for that type of work helps. So for a knife that falls into the military/survival knife category, it's not bad at all even for detail work. But it is clear that it doesn't compare favorably to a smaller knife when it comes to finesse. But there are always compromises to be made with this type of knife.

The tip is relatively thin to be found on such a robust knife. But the fact that it lasts has been confirmed by the fact that on many occasions I have rammed it into my throwing knife targets**** and bent the knife sideways. Otherwise, it can be pointed out that the penetration ability is very good. Something that is emphasized by the shape of the handle and the finger guard. No risk of slipping. This means that you also dare to drill with the knife if necessary.

Other materials such as cardboard and fabric are no problem to handle either. However, this is not my first choice for outdoor cooking. Sure, a sharp edge can be used for most things, but the RTG is thick behind the edge, the blade is thick and the coarse coating doesn't help if you have to chop onions. But that was probably not the intended use of the knife either.

The ultimate test of a knife's construction, is knife throwing!

An extreme form of abuse is throwing a knife. In addition to possible misses, strong vibrations occur in the knife upon impact, which can cause any normal knife to self-destruct. The RTG-1 survived a while of throwing which is impressive!

In addition, I have actually tried chopping and cutting car tires (abandoned ones should perhaps be emphasized, the car owners will be so sad otherwise) and cutting thick carpet just to see how it feels. It can be said that the knife can perform such tasks without damage to the edge or tip. The same applies to ropes of a tougher variety. But there the knife loses its sharpness after a while. This especially applies to slightly dirtier tamps that have been in the lake for a while. There is often a little dirt and sand in them. In those contexts, I highly recommend that you carry a sharpener in your pocket.

Handle

The RTG-1 is a classic full-tang knife where the steel is exposed all the way from the ricasso to the pommel. It also sticks out, so it can be used as an improvised impact tool. There is also a hole for a lanyard. The handle sides are made of G10 which are screwed in place with three very strong bolts. A construction that won't break in the first place. In addition, it means that the knife can be disassembled for cleaning if desired. Or to switch the handle material if you feel like it. I think a pair of dark wooden sides would look nice. 

It can also be added that the G10 is, if not indestructible, at least extremely difficult to break. In addition, it is resistant to many corrosive substances as well. Both G10 and the other option Micarta are therefore good choices for this type of knife.

RTG- is a full tang knife with sides in G10 or Micarta

In terms of shape, the handle is rather short and thick

However, the sides that come original are well shaped and fit my hand well. Or rather, the grip took some getting used to in my case. Namely, it differs from most in a couple of respects. In general, it is shorter than many others*** The available grip length is just over ten centimeters measured from behind the finger guard to the end of the handle sides. 

The finger guard is otherwise very well designed and fulfills its function well without adversely affecting the ergonomics. This means that it does not cut into the finger as soon as you stab with the knife.

To provide a good grip, there is a combination of a finger guard and a deep recess for the finger complemented by grooves on the underside of the handle. Then the G10 material itself provides some traction 

The sides of the handle are flat but well-chamfered towards the edges. The surface is fairly smooth, which does not give much traction, but this is compensated by a ribbed pattern on the underside. Then the deep finger recess makes the grip significantly stronger. Without it, I wouldn't have appreciated the handle as much. Now it's good.

The standard grips work well, although the handle shape required a bit of getting used to on my part

The thickness of the handle is 22.5 mm but feels thicker, probably because the handle is short as I said. Even so, the most used grips work. This applies to both a normal hammer grip and a saber grip with a thumb on the intended grooves on the back of the blade. Sympathetic is also that the reversed grips are comfortable. Unlike folding knives, it happens that I hold a fixed blade like an ice pick or turn the edge if I am going to chop or carve against the body with "draw cuts" when needed. 

Sheath

The RTG-1 comes with a well-made Kydex sheath. It is of the "taco" type, ie it consists of a sheet of Kydex which is then folded around the knife and shaped. It has then been fitted with nine eyelets which both hold the sheath together and act as attachment points. It is therefore easy to attach the knife to whatever you feel like. I myself used the knife for a long time without the belt clip. Instead, I carried the knife loosely in a bag or alternatively attached it to the outside of one of my backpacks.

The well-made sheath is made of Kydex and holds the knife in a firm grip

The sheath has a very good fit, which means that the knife sits fairly securely. But still not so hard that it is difficult to pull. But if I were to carry the knife upside down, I would use the supplied cord with a drawstring to secure the knife in the sheath, just in case. It doesn't fall out by itself or with light shaking, but if you know that you're going to throw yourself out of an airplane, be around deep waters, or the like, extra security isn't bad. Therefore, I would have liked to have seen a complementary retainment strap on the sheath. 

The belt attachment consists of a metal clip that is attached to a removable Kydex plate

The fit also makes the knife quiet when sheathed. This a detail that is rather important, not least for the hunter who needs to be silent. But even in general, wearing a rattle on your hip is annoying. That is avoided here.

At the bottom is a drainage hole, a detail that is especially needed on a knife equipped with a carbon steel blade.

The knife can either be lashed to equipment or backpack as said or perhaps more commonly carried with the included clip. The clip is attached to a plate of Kydex that allows you to carry the knife high or, as I prefer, a little lower on the belt. It was attached with four Chicago-type screws with rubber spacers in between. One limitation is that the size only allows up to 50 mm belt width. It might be good to know. Since it is a steel clip, it can certainly be attached to wider straps than that, but then it does not sit as securely. 

Conclusion

With the RTG-1, in my opinion, EKA have succeeded well in their goal of broadening and modernizing the range. The knife is very robust and may be counted in the class of military/survival knives as it is usually called in mainly Anglo-Saxon parlance. I consider it an all-around knife for outdoor life of all kinds. But I have no problem seeing the knife in the first-mentioned roles either. The design feels well thought out and the construction is tough enough.

The competition is fierce and comes, for example, from the Czech ANV. But the EKA RTG-1 stands up well in comparison

However, competition is fierce in the segment. Among many others, there is the Fällkniven A1, the well-established M07 Sissipuukko from JP Peltonen, and not least the ANV M311 Spelter I recently reviewed. Then there are always ESEE knives such as model 6, given the kinship.

But the fact is that the RTG-1 compares well with other knives. It can live on its own merits. There are a few things in the plus account that contribute to that. 

RTG-1 is, in my opinion, a good knife for outdoor life, although I like to supplement this type of knife with a folding knife

Firstly, in terms of quality, the RTG-1 can compete with most if we are to count knives in the slightly more robust school. This is a simple but very well-built knife. Rowen knows what they are doing and EKA was right to turn to them even if it probably affects the price tag.

But what I think is one of the main merits of the knife is good balance. This means that the knife, which is certainly not huge, feels almost nimble in the hand. Being quick and lively makes it a joy to work with. Especially since at the design stage, they chose to refrain from the American invention of "finger choils". There are those that work but the exceptions prove the rule in my opinion. The fact that the edge is drawn close to the handle makes the knife easier to work with. This is where the precision is found and not least the power if you need to put weight behind the cuts. 

The shape of the handle, and not least the width, provides a good contact surface against the hand and thus you can use force when required. Incidentally, the handle of the RTG-1 was one of the things that surprised me the most. It feels short and thick but with some getting used to it is comfortable.

Then the RTG-1 is a durable knife. That's one of the selling points and I'm inclined to agree with them. If you can throw a knife without it falling to pieces after a while, it is sturdy. Likewise, I failed to bend the tip despite some deliberate abuse.

EKA RTG-1 is a knife for those looking for a robust knife for mixed outdoor life

Having said that, I can't help but recommend the EKA RTG-1 to anyone looking for an extremely robust knife for mixed outdoor life. It also doesn't hurt that it's pretty good-looking for being of this type.

Specification:

Length Overall: 270 mm
Blade Length: 150 mm
Blade Thickness: 5 mm
Steel: 1095 with powder coating
Weight: 290 g / 420 g with and without sheath
Handle: G10
Sheath: Kydex

Produced by EKA, made in the USA


/ J

* Among them, the Swedish design classic Swede 38 can be mentioned.

** I already have experience with it from a small Candiru.

*** For comparison, the ANV M311 can work which is a similar knife with roughly the same size. There, the grip length is 11.5 cm, and then the front part is angled, which makes the handle even longer. Then a "forward finger choil" is added for even more grip options.

**** The material is slow-grown thick birch. Before they are watered, they are quite hard. Incidentally, one task for which I frequently use knives is to "shave" the targets. That is, cut away any loose material to make them firmer again.

New Knife - EKA RTG-1

It was a long time ago since I presented a new knife from Swedish EKA here on the blog so it could be on time was my thought. The last time I reviewed something from them, it was one of their at this classic folding knife models in the form of a Swede 92. The most modern model I looked at was a Swede 8, which certainly belongs to the later generation of knives from Eskilstuna but is hardly new to the market. It was four years since I wrote about it and it was not completely new then either.

But now it is not just my "fault". In fact, EKA has not been very good at releasing new models or keeping up with trends for that matter. But something has changed and with it, some new knives have seen the light of day.

One of the latest is this fixed blade named RTG-1. A knife I thought looked interesting the first time I saw it. It made me associate with knives like Fällkniven F1 or maybe A1 and especially the Finnish Peltonen's Sissipuukko M07.

EKA RTG-1, a proper "Swedish American"

RTG-1, which incidentally stands for "Ready To Go", is an odd bird to be included in EKA's range. Otherwise, classic folding knives and some fixed blades that previously had a clear focus on hunting and outdoor life dominate. I am thinking of knives like EKA Swingblade and Nordic W12 for example.

Against this background, this and a few other models stand out by belonging to the modern "tactical" style. It can be discussed whether it is an advantage or a disadvantage and what should be included in that concept, but often it is about marketing that includes the military, possibly police (mainly in other countries than Sweden), and rescue personnel of all kinds. Sometimes they are called military knives, sometimes survival knives.

Well-designed knives do well as outdoor tools

But if they have a healthy design and are well made, you have a real tool ready for most things that can be expected to meet a knife. That was what I thought I saw in the pictures on RTG-1. The knife is solid without being overly large, the blade is simple and looks competent in my eyes. The materials seem well chosen as well. The handle sides in this version consist of black G10 and the blade is 1095 carbon steel with a coating. Those who think they recognize the type of somewhat rough surface from, for example, an ESEE are quite right. For example, if you turn on a "Candiru" and read, it says "Rowen". They are the ones who make this knife for EKA as well.

If you are unsure, it says "made in the USA" on the box as well, just in case. In other words, it's not something they are trying to hide. In this case, it also means a quality stamp and the first impression of the knife is very good. It feels solid, it is well balanced with a really sharp factory edge and the sheath is a very well-made one in Kydex. 

I look forward to testing this knife!

/ J 

#knivesandbikes #knivigtvarre

Review ANV Knives M311 Spelter

  - a serious challenger from the Czech Republic

Acta Non Verba Knives or ANV as it is abbreviated is a brand from the Czech Republic that I presented here on the blog before. What was relevant then were folding knives of a few different types. Now it's time for a fixed blade instead. Nor is it just any knife but the M311 Spelter. A military and survival knife that was developed for the toughest conditions. Now I do not intend to devote myself to "survival" in that sense, but when I saw the balanced measurements, I realized that this is also an excellent knife for outdoor life in general.

After that, it only remained to see if my positive expectations had any bearing in reality.

ANV Knives M311 Spelter

M 311 Spelter is a knife that, like the Swedish Fällkniven F1*, was developed in collaboration with various units within the respective Armed Forces, including the air force. That background means that there are some common denominators between it, the M311 Spelter, and a number of other well-thought-out survival knives on the market. These are areas such as general dimensions, the design of the handle, and the functionality of the blade.

As usual in the case of ANV Knives, the knife can be built on their website, which gives many options when it comes to appearance. You can choose between seven different variants on the blade and three colors on the handle as well as three more colors for the sheath. Then you can start counting the number of combinations. In terms of appearance, most people are likely to be satisfied!

Acta non verba Knives offers only the best materials in this knife

Twitter version: ANV Knives M311 Spelter, a military and survival knife built from pure top materials to handle most things. A real home run!

Blade

Spelter is a knife that has a very advanced blade hidden behind a simple basic shape. It is a classic drop point used as a canvas for this work of art. Subsequently, it has been provided with a number of distinctive details such as a pronounced recess for the index finger, depression for the thumb at the base of the blade spine, and not least a swedge which does not start at the tip, which is rather unusual. In addition, a rounded blade spine can be added and the blade is blackened.

The dimensions are restrained, which means a blade length of 12 cm with a height of 3.7 cm. The stock thickness is 5 mm which is not excessive to belong to this class of knives. It gives a strong knife without it becoming heavy and clumsy.

The twelve-centimeter long blade is blackened by DLC

The steel is Swedish Elmax ** in this case. No doubt it belongs to the group of the so-called "super steels". Elmax Superclean is powder steel which, in addition to being able to get very sharp, is also extremely durable. This applies to both sharpness and toughness. This means that if it does not stay sharp forever, then at least for a very long time. A bit of maintenance in the form of a few strokes with a ceramic or diamond sharpener or rod and you do not have to resharpen your blade very often. 

My previous experiences with Elmax are that it is really rust-resistant but that like all steels it can get stains and therefore ANV has chosen to provide the blade with a black coating. Then there is probably some thought that reflexes should not be visible, but it is a trait I personally am less interested in. But it's true, the matte surface does not glisten if you point a flashlight at it in the dark.

In this case, it is DLC (Diamond-Like Carbon) that was used to make the blade black. It is theoretically one of the most sustainable alternatives available. It turns out to apply in practice as well. During the test period, it has not worn despite the fact that I beat on the knife a bit, among other things by batoning very dry hardwood. 

The blade steel is Elmax hardened to 60 on the Rockwell scale. It gives a blade that keeps its sharpness for a very long time

The blade has been provided with a high flat grind, a "saber grind", which ends with a decent factory edge. The knife was sharp on arrival but not one of the sharpest. The edge shaved hair with some pressure if it says anything? The thickness behind the primary edge is 0.8 mm.

This means that Spelter is rather thick behind the edge, which of course is a result of the intended area of use. In a knife of this type, durability is one of the priorities. I have chosen to sharpen the knife and in connection with that reprofile the edge slightly. Elmax can be thinner without risking being brittle. A heads-up when it comes to that bit though. This is a "super steel", which means that you have to invest some elbow grease to get the knife sharp again. On the other hand, that sharpness lasts for an extremely long time, as I said. 

Spelter has also been used to chop in both fresh and, in this case, extremely dry wood. All to see if the edge would bend or get damaged. The long handle allows you to hold far back to get more power when chopping

That detail together with the choice of material and the general appearance of the knife makes you want to test it hard. After all, this is a tough military/survival / outdoor knife, which means that I used it for typical outdoor chores. It includes cutting ropes and some thinner cortege and of course wood in lots of shapes. This means both fresh branches and dry wood. I have split wood both lengthwise and crosswise. The last literally was when Spelter was used to hammer through wood against the fibers. No sign of edge damage after that either. In addition, I have tested the strength of the tip by jamming it into various pieces of wood and prying it out sideways. It holds up for that too!

Thin fresh wood is of course not a challenge, but it shows that the M311 Spelter also works well for more detailed work. It is easy to shift grip and move forward and actually use the finger choil

"Batoning", or the noble art of splitting wood with a knife, poses no problem either

Then, of course, the knife has also been used to make fire. It includes preparing firewood, splitting small logs, and making some kind of feather sticks. That is not my forte. I also used the knife with fire steel. The latter must unfortunately be done with the edge. If you know that it is a recurring task, I recommend that you sharpen a piece of the swedge for the purpose.

In addition to that, I have of course used the M311 on non-natural materials including cardboard, plastic, jute fabric, and dirty nylon rope, which is something that wears extremely on the edge. It handles those materials gallantly. Then it is if not fantastic then fully compatible with onions as well. That is if you want to indulge in a little outdoor cooking. Even camouflage-colored warriors on two legs must eat.

Overall, this knife is just as versatile as I hoped and wanted!

Handle

There are a couple of different basic types of handles and a dividing line can be drawn between thinner handles and the fuller ones. This handle belongs to the latter variety. It really fills the hand and does it in an excellent way. It is not far from perfection. The length is 15 cm, the height is around 3 cm and the thickness varies between 1.9 cm to a full 2.8 cm.

Then this handle is very anatomically shaped to provide good ergonomics in a number of different grips. To begin with, there is a really good "forward finger choil", a recess for the index finger, which in combination with the finger guard provides high security if you use the tip or stab with the knife. Then ANV has chosen to let the handle taper off to improve the grip. The handle also includes a palm swell and then narrows again before it ends with a small edge at the back where the knife is both thicker and has a small beak to hold the hand in place. The handle also has a recess on the top of the handle for the thumb where a couple of solid grooves have been cut out to further improve the grip. That depression also has its equivalent on the blade mentioned earlier.

ANV has achieved a very well-thought-out handle that provides good ergonomics

A lanyard hole is found in the extended tang. It can also be used as an improvised hammer as long as it isn't steel in the receiving end. But for hammering a pole into the ground the knife works great.

It is thus a very advanced handle when it comes to shape. At the same time, it is amazingly simple and fits the hand very well. In pictures, I think it is reminiscent of knives from, for example, Bill Harshey, which is a good rating.

The handle is very well sculpted

The material that is so well shaped is Micarta of the highest quality. It is then screwed with four (two per side) M5 screws which, like the blade, are DLC-treated to hold better. The knife is a full tang knife as can be seen in the pictures and ANV has chosen to let the steel stand proud to round off the profile further. Here, too, the steel is well rounded. 

The most interesting question is whether all these forms can also be used in practice. The answer is short, yes it is possible. Not only does it work but it's excellent! This is one of the best handles I have come across when it comes to the variants that are built for many different grips. To begin with, this is one of the few handles with "choils" / finger recesses that actually work. It is large and rounded enough to house most size fingers at the same time as the angled front end of the handle means that you can still apply some force when cutting hardwood, for example. It is a very important feature that is often missed on knives that include this detail. In addition, there is the recess on the blade spine when you want to engage in detailed work.

Spelter has a handle that is flexible when it comes to different grips

As I said, the basic grips work excellently. In a hammer grip, the knife feels solid with its full shape that literally melts into the hand. At the same time, it is more difficult to generate power in that grip since the hand end up a bit away from the edge, but as I mentioned before, the angled front of the handle helps. The sides are also thinning at the front to facilitate a pinch grip. Something that is not clearly visible in pictures. 

Saber grip is just as effective and here you can choose how far forward you want to hold, with your thumb in front of or behind the finger guard. It is also possible to move the hand really far back to get a little more power behind the edge if you swing the knife to chop something.

In addition to the shape of the handle providing excellent grip, the pattern milled into the Micarta also contributes to increased traction. This means that there is less risk of slipping even if you have wet and/or cold hands. This knife has been used during both winter and spring and it works well even with a little thicker gloves on. 

Sheath

The sheath that comes with the M311 Spelter is of the "pancake type", ie one made of two pieces that have been pressed together. It provides plenty of attachment points around the edges if you need them. The footprint is larger than a taco-style sheath, but there are advantages and disadvantages to both types.

The material used is Kydex and the fastening device itself is a pair of folded plastic hobs. However, made of very tough plastic which seems to be really durable. But with these mounts, other systems can also be used if desired.

The fastening device takes all dimensions of belts and is equipped with quick locks so that the knife can be easily removed or secured elsewhere

The sheath comes in a few different variants as mentioned earlier and this version is some form of O D green with a light gray shade. It matches the knife very well. A spacious drainage hole is found in the bottom of the sheath.

The knife fits really snuggly in the sheath with very little rattling or other noises. The Kydex material squeezes the knife hard enough so that it is not dropped. Not even if you turn it upside down and shake it hard. On the contrary, the knife is a bit sluggish to pull when the sheath was new.

Speaking of which, there is an excellent thumb ramp to use for that purpose and just the right amount of the finger guard is visible so that you get a good grip directly from the sheath if you pull the knife quickly. There is no need to change grips, which is otherwise not entirely uncommon.

The knife sits high up on a belt

If you carry a backpack with a carrying strap, the knife may be moved to another location

I myself carry this knife in two different ways. If I'm just out walking or hiking, the knife is on the belt. But since it sits quite high up, it is not preferable if you carry some form of a larger backpack with a carrying strap. Then I attach this knife to the backpack straps instead. The straps are also "MOLLE-compatible". Something that is of less interest to me nowadays. But it makes the sheath easy to attach to other things as well.

Conclusion

My impressions of this knife can only be summed up by the fact that it is a really qualified challenger in the class, no matter what knife it's compared to. The design is well thought out, which results in many built-in features, which not least provides excellent ergonomics in many different grips. 

It has since been implemented in a consistent manner where some of the best materials available have been selected. The package includes Kydex, Micarta, and not least Elmax with DLC coating. Steel that beats most of the competition. The build quality is outstanding and shows the know-how that exists in this part of the world. More specifically, Bohemia in the Czech Republic.

ANVs Spelter is a very advanced knife that can handle most things

Then the knife looks good in a slightly brutal way. It has a serious look if you see what I mean. But it was, after all, the relatively restrained design, especially in terms of dimensions, that made me take a closer look at this knife. It is not full of gimmicks but the details that are there are there to improve the function. Basically, it is a fairly simple blade shape that is then provided with a number of exciting details. The blade works really well for mixed outdoor life and I am sure even for more serious applications if necessary. It is, after all, a knife made with the military, rescue personnel and the like in mind.

M311 Spelter has been used even in colder conditions and the handle is very functional even with gloves on

Then it can be stated that in addition to the eminent blade, the handle is very good. There are not many handles found on knives that include the word "military" in the description that is so comfortable to actually work with. Sure, if you are going to carve for two hours, a Mora Bushcraft is a bit better, but otherwise, this is a superb handle. I was a little worried that the pattern and the grooves that were there could give rise to a "hotspot bonanza", but my suspicions fell short.

ANV M311 Spelter is an extremely well-built knife and thus very good for all outdoor life

If it has not already been stated, I can only say that this is an extremely good knife in its category. It simply does not get much better. Different yes, but not better. Quality doesn't come cheap though. At the time of writing, ANV M311 Spelter costs around 320$ and about the same amount in Euros. Not cheap but it is also a premium knife with premium qualities. A knife you will have for the rest of your life.

Specifications:

Length Overall: 275 mm
Blade Length:  120 mm
Blade Thickness: 5 mm
Steel: Elmax, 60 HRC
Weight: 288/386g  knife/knife + sheath
Handle: Micarta
Sheath: Kydex

Produced by ANV Knives, made in the Czech Republic 

/ J 

* But it is slightly longer than the mentioned model, so if it is something it should be compared to, it is in that case model A1. However, the M311 is slightly shorter and above all lighter than that knife.

** The website states that if you choose the untreated blade, Sleipner is used instead. It is, by the way, another Swedish super steel.